The led light strip manufacturer tells you how to choose the lamp belt?
Published by Publisher: adminDate: 6/20/2024 8:57:18 PM Read: In this modern smart home life, many people are not satisfied with a single main lamp decoration style, but also install some lights to increase the comfort and warmth of the room, the lamp belt is convenient to install, and can be flexibly used in all kinds of space. create a home environment with different styles. So how to choose the LED light belt? Come on, let's find out about it with the led light belt manufacturer today.
1. LED lamp tape chip.
LED is originally a stable current device, so a major culprit caused by conventional high voltage lamp belt is the lack of constant current control module, let LED work in the valley type fluctuating voltage, city power instability will further aggravate the burden of LED, and then lead to conventional high voltage lamp belt prone to dead lights and other failures. Therefore, a good light belt must have a good chip to stabilize the current.
Second, the number of LED lamp beads.
If the number of LED beads in a unit is the same, it can also be judged according to the wattage, the wattage with high wattage should be brighter.
Third, the length of the lamp belt.
The lamp belt has the unit number, which needs to be purchased according to the integral multiple of the unit number. The unit number of most lamp belts is 0.5m and 1m. What if the number of meters required is not a multiple of the unit number? Buy a more flexible light belt, such as each 5.5cm can be cut, can better control the length of the light belt.
Fourth, the lamp has the light color.
The color of light emitted by the lamp is naturally the first to be considered.
The light and color of the lamp belt is mainly determined according to its own decoration style and hue. 3000K warm light and 4000K neutral light are commonly used in the home, the light color is comfortable and the lighting effect is warm.
Fifth, the brightness of the lamp belt.
The degree of the lamp belt depends on two points:
1. The number of LED beads in a unit.
The more the number of LED beads in the same unit, the higher the brightness. In order to avoid the uneven luminescence caused by the uneven surface of the lamp belt, that is, what we often call "granular light", "wavy light", the denser the lamp beads are, the more uniform the relative luminescence is.
2. Luminescence should be uniform.
The brightness between the lamp bead and the lamp bead should be the same, which is related to the quality of the LED lamp bead. Usually we quickly judge the method: with the eyes! At night, watch the light belt to observe the brightness of the light belt, and change the light rhythm light.
The brightness of the lamp belt should be the same at the beginning and end, which is related to the voltage drop of the LED lamp belt. The LED lamp belt needs to be driven by a power supply, which will occur when the current carrying capacity of the lamp wire is not enough. In practice, it is recommended that the whole lamp belt should not exceed 50m.
