LED light belt project how to select products, how to connect the power cord?
Published by Publisher: adminDate: 6/20/2024 9:06:11 PM Read: How to connect the power cord and the light belt.
First install to determine the length, and then intercept according to the length. Because the LED light strip generally takes 1m as a segment, so press 1m to cut when cutting, this way will not affect the whole circuit, if you cut, it will cause a unit not to light.
Then connect it to the plug, the LED light belt will have a special plug, you can use the pin method to connect it to the light belt on both sides of the wire. Led is a diode DC drive, so there will be positive and negative poles, if the positive and negative poles are opposite, it is the case of insulation, so the lamp belt is not bright, at this time it must be the plug can be reversed and plugged into the normal use. Then connect the connectors to the power cord and secure them together using insulating tape.
Second, how to choose the LED light belt.
1. Guangdong lamp belt manufacturers suggest that when choosing LED light belt, we can choose it according to its different color. Now there are many kinds of LED lights on the market, such as white, yellow, blue and so on. And can be matched according to the decoration style, so that the overall collocation is more coordinated.
2. There are many models of lamp belt itself. For example, flat third line, flat fourth line and round second line, LED light belt and so on. LED lamp belt has the characteristics of environmental protection, energy saving and no pollution. Like the old-fashioned flat three-wire lamp strip, the brightness is relatively low, the power consumption is very large, and now it is basically not in use. So when we choose the light belt, we should choose the LED light belt, we usually use the LED light belt model has 5050, 3528 and so on.
