Correct installation method of LED light belt
Published by Publisher: adminDate: 6/20/2024 9:07:27 PM Read: Installation steps of led lamp belt.
1. First of all, determine the length to be installed, and then intercept it as an integer.
This kind of light belt is 1 meter a unit, only cut off from the cut, will not affect the circuit, if cut at will, will cause a unit not bright. For example: if a length of 7.5 meters is required, the lamp belt should be cut by 8 meters.
2. Link plug.
LED itself is a diode, DC drive, so there is a positive and negative pole, if the positive and negative electrode reverse connection, it is in a state of insulation, the lamp belt is not bright. If the connection plug is not on, you only need to disconnect the other end of the light belt.
3. The placement of the lamp belt.
The light belt is packed on a plate, and the newly opened lamp belt will be distorted and difficult to install, so you can first tidy it up and put it into the lamp slot. As the lamp belt is one-sided luminous, if the placement is not smooth, there will be uneven light and shade, especially at the corner.
Let's take a look at the installation methods of different aspects.
1. Indoor installation: when LED light belt is used for interior decoration, it is very easy to install because it does not have to be beaten by wind and rain.
Some LED light belts are affixed with self-adhesive 3M double-sided adhesive on the back. When installing, you can directly tear off the sticker on the surface of the 3M double-sided adhesive, then fix the lamp strip where you need to install it, and press it flat with your hand. As for some places need to turn a corner or grow how to do? Very simply, the LED light belt is a series-parallel circuit structure consisting of a group of three LED, and every three LED can be cut off and used separately.
2, outdoor installation: outdoor installation will withstand wind and rain, if fixed with 3M glue, it will reduce the 3M stickiness for a long time and cause the LED lamp belt to fall off. Therefore, outdoor installation often uses the card slot fixed way, need to cut and connect the place, the method is the same as indoor installation, but need to be equipped with additional waterproof glue to consolidate the waterproof effect of the connection point.
3, power connection method: the general voltage of the LED lamp belt is DC 12V, so the switching power supply is needed. The size of the power supply is determined according to the power and connection length of the LED lamp belt.
If you do not want each LED lamp belt to be controlled by a power supply, you can buy a switching power supply with relatively high power as the total power supply, and then connect all the LED lamp belt input power supplies in parallel (if the wire size is not enough, it can be extended separately), unified by the main switching power supply. The advantage is that it can be controlled centrally, and the inconvenience is that the lighting effect and switch control of a single LED light belt can not be realized, which way can be measured by oneself.
4, controller connection mode: LED racing light belt and RGB full-color light belt need to use the controller to achieve the change effect, but the control distance of each controller is different, generally speaking, the control distance of the simple controller is 10 to 15 meters, the control distance of the remote controller is 15 to 20 meters, up to the length can be controlled to 30 meters. If the connection distance of the LED light belt is long, and the controller cannot control the long light belt, then you need to use a power amplifier for the tap.
Through the above introduction, I believe everyone has a certain understanding of the correct installation method of led light belt, led light belt manufacturer Shenzhen Changxin Optoelectronics Technology Co., Ltd. is a research and development, production, sales, service in one of the LED lighting high-tech enterprises, with 13 lamp belt industry advanced production lines, daily output of up to 200000 meters, customers and friends in need are welcome to consult to understand oh.
